Want to know more?
We’d love to hear from you.
You can download the software from the link provided in your order-related emails.
You can find your UDID in the Quick Start Guide that is included in your LinkSquare Basic.
LinkSquare Basic provides both raw and pre-processed data.
Pre-processing minimizes measurement variation and reduces noise.
No. You will need your own tools, such as Excel or MATLAB.
We do not provide data-related services to individual LinkSquare Basic users. However, we do work with enterprises or groups in search of custom database solutions. Please see our Enterprise page for more information.
Stratio does not have access to, or ownership of, any of the data you collect with LinkSquare Basic.
IoT Mode and AP Mode are the names of the two different modes through which you can connect to a LinkSquare device.
You can use IoT Mode when there is a Wi-Fi network available. The LinkSquare device will connect to your computer (iPhone) through the existing Wi-Fi network without any interruption to your internet connection. In situations where your Wi-Fi connection information does not change often, IoT Mode makes it easy to connect your LinkSquare device.
You can use AP Mode when there is no Wi-Fi network available. LinkSquare will be a wireless access point (WAP) and your computer (iPhone) will connect to LinkSquare directly. In this case, your internet connection will be interrupted.
Yes. LinkSquare can only be connected through Wi-Fi. Your computer (iPhone) needs a Wi-Fi network adaptor.
We recommend that you purchase a USB Wi-Fi network adaptor that supports 802.11 b/g/n.
Yes. You can maintain your current internet connection.
There are several known issues that prevent your LinkSquare from being used in IoT Mode, including:
- Wi-Fi frequency bands other than 2.4GHz,
- Wi-Fi standards other than 802.11b/g/n,
- 802.11n with Modulation and Coding Scheme (MCS) index value 8 or higher,
- Wi-Fi router not supporting mDNS service discovery,
- Wi-Fi router requiring an extra authentication step, such as a Terms and Services agreement page, or
- In case of computer, firewall settings blocking mDNS service discovery.
- 802.11b/g is fully supported.
- 802.11n with MCS index value 7 or lower is fully supported.
- 802.11n with MCS index value 8 or higher is not supported.
- Other 802.11 standards are not supported.
Go to Control Panel > System and Security > Windows Firewall > Advanced Settings. Under 'Inbound Rules', there should be an entry that allows connections with UDP protocol to local port 5353. It should not be bound to a specific program.
When your LinkSquare is preparing for discovery, the blue LED lights around the LS Button will blink quickly for up to 30 seconds. When your LinkSquare is ready for discovery, the blue LED lights around the LS Button will begin to blink slowly, approximately once every 1.5 seconds. If the LED lights are green, press the LS Button once so that the LinkSquare device can change its connection mode.
If a LinkSquare device is connected to an existing Wi-Fi network, it becomes ready for discovery. There is a chance that the device is connected to a Wi-Fi network other than the one that your computer (iPhone) is connected to. In this case, switch to AP Mode and change the Wi-Fi network information using the LS Config program (through the Device Settings page).
The Device List shows available LinkSquare devices by their names. The initial device name is a 7-digit alphanumerical word. The three numbers at the end of the initial device name are the same as the last three digits of your Unique Device ID (UDID) (found in your Quick Start Guide). You can also change the device name later using the LS Config program (through the Device Settings page). Once you change the device name, the device list will show the new device name instead of the 7-digit initial device name.
Currently, only one software can be connected to a LinkSquare device at any one time. Please make sure that there is no other software program (e.g., LS Collector, LS Config, or LinkSquare App) using the LinkSquare device.
No. AP Mode requires you to connect to a Wi-Fi network created by your LinkSquare device. You will lose the internet connection.
The Initial Service Set Identifier (SSID) of a LinkSquare’s Wi-Fi network starts with "LS-" and ends in a 7-digit alphanumerical series. This 7-digit series is the same as the initial device name explained in the IoT Mode section; the last three numbers are the same as the last three digits of the Unique Device ID (UDID) (found in your Quick Start Guide). You can also change the device name later using the LS Config program (through the Device Settings page). Once you change the device name, the SSID of your LinkSquare’s Wi-Fi network is the "LS-" prefix followed by your chosen device name.
The initial password is eight zeros (00000000). You can change the password later using the LS Config program (through the Device Settings page).
You can reset the password to its initial value. First, turn off LinkSquare. Then press the LS Button to turn on the LinkSquare device. Keep holding the LS Button for approximately 20 seconds, until the LED lights around the LS Button flash. It indicates that the password is initialized.
Based on the SSID of the current Wi-Fi network, your computer (iPhone) is not connected to a LinkSquare device. Please make sure that the Wi-Fi network connection is properly set up.
In AP Mode, only one device, such as a computer, smartphone, or tablet, can be connected to your LinkSquare’s Wi-Fi network at any one time. Please make sure that no other device is connected to it.
Product and Safety